Splats Stronger Shock Spring for the Sachs Rear Shock on the Beta Evo trials models from 2015 to 2025.
Will also fit older rear Sachs shocks, please see description below for limitations.
Selecting the correct spring for your weight is a good starting point, but most riders could comfortably use one softer or one stiffer:
- Using a softer spring with more preload will provide a more lively response.
- Using a stiffer spring with less preload will offer greater stability.
- Riders of a very high standard (European/World Championship level) tackling massive steps and drops may prefer an even stiffer spring.
Spring Dimensions:
- The spring is 131mm long.
- Outer diameter varies due to spring stiffness.
- 43mm inner diameter top.
- 48mm inner diameter bottom.
Older Sachs Shocks: These will have fittment limatations, this is due to the spring being slightly shorter than the orginal and will only allow a few mm of preload, a pre load spacer will be required if more needs to be added.
- Beta EVO - 2009 - 2014
- Sherco ST - 2004 to 2005
- GasGas TXT Pro - 2002 - 2014
These high-quality springs are designed specifically for Sachs rear trials shocks, ensuring a perfect fit.
Each batch undergoes rigorous testing post-manufacturing to guarantee the spring rate is within +/- 2.5% of the rated stiffness, significantly surpassing the British standard of +/- 10%.
Crafted from premium Chrome Silicon steel (54SiCr6), the springs are cold coiled using CNC machinery, then heat-treated and shot-peened to relieve residual stress. The ends are closed and ground flat. For durability and aesthetics, they are zinc phosphate coated for rust protection and epoxy powder coated in black.
Picture is for illustration only.